Ceramic PCBs made from alumina (Al₂O₃), aluminum nitride (AlN), or silicon nitride (Si₃N₄) are inherently free of the six original RoHS-restricted substances in their base substrate form. For any RoHS REACH PCB compliance effort, the risk sits in the metallization, solder, and surface finish layers — not the ceramic itself. Understanding where each regulation applies, and which exemptions are relevant, prevents delays at incoming inspection and keeps your bill of materials audit-ready.

EU Directive 2011/65/EU (RoHS 2) restricts ten substances in electrical and electronic equipment placed on the EU market. The maximum concentration limits are measured per homogeneous material, not per finished assembly. For ceramic circuit boards, the substrate itself passes easily. The risk areas are the conductive and protective layers added afterward.
| Substance | Max Concentration | Where It Appears on a Ceramic PCB |
|---|---|---|
| Lead (Pb) | 0.1 % by weight | Solder paste, thick-film conductors, some glass-frit inks |
| Mercury (Hg) | 0.1 % | Not typically present |
| Cadmium (Cd) | 0.01 % | Some older thick-film resistor inks |
| Hexavalent Chromium (Cr⁶⁺) | 0.1 % | Certain passivation or conversion coatings |
| PBB | 0.1 % | Not present in ceramic substrates |
| PBDE | 0.1 % | Not present in ceramic substrates |
| DEHP, BBP, DBP, DIBP (4 phthalates) | 0.1 % each | Packaging materials, cable insulation in assemblies |
Source: EU Directive 2011/65/EU, Annex II, as amended by Delegated Directive (EU) 2015/863.
Thick-film ceramic processes historically used lead-containing glass frits to bond conductors to the substrate. Lead-free thick-film inks are now standard from major paste suppliers (DuPont, Heraeus), but you should confirm the specific ink system with your fabricator. If your application requires high-temperature solder joints above 300 °C, ceramic PCB standards and specifications may reference RoHS Annex III Exemption 7(a), which permits solder alloys with ≥ 85 % lead for high-melting-point applications. This exemption is reviewed periodically by the European Commission, so track its status if your product has a multi-year production life.
REACH (EC 1907/2006) is separate from RoHS and broader in scope. It requires that any article placed on the EU market containing an SVHC above 0.1 % w/w must be disclosed to the customer, and in some cases notified to the European Chemicals Agency (ECHA). As of January 2025, the SVHC Candidate List includes over 240 substances. Any RoHS REACH PCB documentation package must address both regulations independently.
For ceramic PCB fabrication, the REACH-relevant chemicals are found in:
A compliant supplier should provide an SVHC declaration updated at least annually, referencing the version of the Candidate List it was checked against. If the declaration only says “REACH compliant” without citing a list date, it is incomplete. Ask for the specific ECHA list version and a positive or negative declaration for each SVHC above 0.1 % in any homogeneous material.
When evaluating a supplier’s environmental documentation, a thorough PCB supplier audit checklist should include line items for both RoHS and REACH declarations with revision dates.
The Dodd-Frank Act Section 1502 (US) and EU Regulation 2017/821 require due diligence on tin, tantalum, tungsten, and gold (3TG) sourced from conflict-affected regions. Ceramic substrates themselves do not contain 3TG, but the metallization and assembly steps introduce them:
| Mineral | Where It Enters the Ceramic PCB Supply Chain |
|---|---|
| Tin (Sn) | Lead-free solder paste (SAC305: Sn 96.5 %), tin plating |
| Gold (Au) | ENIG/ENEPIG surface finish, gold wire bonding, thick-film gold conductors |
| Tungsten (W) | Tungsten metallization vias in HTCC co-fired ceramics |
| Tantalum (Ta) | Rarely in the PCB itself; more common in discrete capacitors on the assembly |
Your supplier should be able to provide a Conflict Minerals Reporting Template (CMRT) from the Responsible Minerals Initiative (RMI). The CMRT traces each 3TG mineral to its smelter or refiner. If your supplier cannot produce a current CMRT, that is a red flag for any OEM selling into regulated markets.
FR-4 laminates contain brominated flame retardants (typically TBBPA) and epoxy resins with potential phthalate content, both of which require active RoHS and REACH management. Ceramic substrates skip these concerns entirely. Alumina, AlN, and Si₃N₄ are inorganic oxides and nitrides — no organic binders remain after sintering above 1,500 °C. This is one practical reason engineers choose ceramic PCB materials for applications where outgassing or halogen-free requirements are strict, such as medical implants or satellite electronics.
That said, ceramic PCBs are not automatically “compliant” just because the substrate is clean. The entire assembly — paste, plating bath, flux, adhesive, conformal coat — must be verified against both RoHS and REACH requirements.

If your product is exempt from RoHS (military equipment under EU Directive 2011/65/EU Article 2(4)(e), or large-scale fixed industrial tools), the compliance burden drops significantly. In those cases, leaded thick-film inks and high-lead solder may actually be the better engineering choice for reliability at extreme temperatures. Similarly, products sold exclusively outside the EU and US may face different or no chemical restrictions. Do not over-engineer RoHS REACH PCB compliance for a market that does not require it — the cost of lead-free high-temperature metallization is real.
For a broader view of certification requirements including UL recognition for ceramic circuit boards, your audit should cover both safety and environmental documentation in a single pass.
The ceramic substrate itself contains no RoHS-restricted substances. However, the metallization layers, solder, surface finish, and packaging must each be verified separately. A bare alumina substrate is inherently compliant; a finished ceramic PCB assembly requires a full material declaration.
REACH is an EU regulation and does not legally apply to products sold exclusively in the US. However, many US OEMs voluntarily comply with REACH to keep their supply chain flexible for global distribution. California Proposition 65 and EPA TSCA impose separate chemical disclosure requirements within the US.
Yes, if your application qualifies for a RoHS Annex III exemption. Exemption 7(a) permits lead in high-melting-point solders (Pb ≥ 85 %) used for specific reliability-critical joints. You must document which exemption applies and include it in your technical file. The exemption is time-limited and subject to renewal review.
Request an SVHC declaration that names the specific ECHA Candidate List version it was evaluated against, states whether any SVHC exceeds 0.1 % w/w in any homogeneous material, and is signed and dated. A generic “REACH compliant” statement without these details is insufficient for audit purposes.
A bare, unmetallized ceramic substrate contains no 3TG minerals and falls outside conflict minerals reporting scope. Once gold, tin, or tungsten metallization is applied, the finished product enters scope and requires a CMRT from the supplier. Unmetallized blank ceramic substrates are the simplest case for RoHS REACH PCB compliance documentation.
If you need a ceramic PCB with full RoHS and REACH documentation, start by specifying the surface finish and solder alloy in your requirements. AluminaPCB provides material declarations and SVHC statements with every production order. Upload your design files for a quote and compliance review at aluminapcb.com.